Forums
Bruker Media
Community Media
Bruker AFM Probes
SPM Digest
Application Notes
NanoTheater
Website
中文
Brochures & Datasheets
Publications
Probes Catalog
Events
Manuals & Documentation
Presentations
Guide to AFM Modes
News
Journal Club
Webinars & Video
Nanovations
Other
Hello,
I will wish to make AFM images at controlled temperature. I recovered a Peltier module and its controller but not the notice ...
This is the cell that sold Veeco there is a dozen years with some afm. I didn't know the characteristics of the probe and the peltier module (see pictures).
http://peralta.u-cergy.fr/images/Controler.jpg
http://peralta.u-cergy.fr/images/Peltiermodule.jpg
The controller is a MTCA 6040 Melcor.
Anyone know what type of device? If so, please explain to me how to properly configure the controller.
Thank you
Sébastien
Hi Sebastien,
The peltier cooling elemeent & temeprature controler you show in the pictures, looks quite different than the product which was offered at any time (by Veeco or Bruker).
we have used a few different elements & temeprature controllers over the years, but nothing which resembles what you show (as far as I am aware).
Can you tell me which AFM model this came with?
Regards,
Peter
Thank you for your answer.
Apparamrent, the Peltier module has been sold with a Dimension 3100 + Nanoscope IIIa, it has more than 10 years.
Without the manual for the controller, I will use the module with a regulated power supply but it is a shame to not use the controller.
Regards
We never had a heater/cooler module product solution for the D3100-NS3a. We had one for the later versions of the D3100 (with NS4, and closed loop scanner), and this heater/cooler was different than the one you showed in the pictures. I guess you might be able to find a manual from the manufacturer of the temperature controller with an internet searhc, or by contacting that company.
Thank you for your response.
I was told that this module was shipped with theAFM but it is probably a mistake. Unfortunately I have not managed to find the manual on internet and Melcor manufacturer seems no longer to exist.
It is not too important, I will use the module directly with a regulated power supply and a thermocouple.
I tried my luck ...