-
AFM Probes Scientist: http://www.bruker-axs.com/unitedstatesandcanada.html#c50011 In our Metrology segment of Bruker Nano Surfaces Division, we design and manufacture atomic force microscopes ("AFMs"), scanning probe microscopes ("SPMs"), stylus profilers, and fast 3D optical microscopes, used to provide critical surface measurements
-
AFM Surface Scientist – Micron Technology, Inc. Opening # BOI27291 The Surface Laboratory Team within Micron Technology utilizes a wide range of state-of-the-art surface analysis metrologies to support R&D and production activities world-wide. Additionally, the laboratory is involved with development activities to maintain the metrology capability
-
As phrased, this is a bit of a difficult question. When you deflect the DMASP piezo, it will create a charge (not a voltage). The equations that relate the conjugate variables of cantilver: angle, deflection, piezo volume, and piezo charge to applied: bending moment, Uniform load (both usually 0 for SPM), Tip Load, and Piezo Voltage are well described
-
See this new Nano Letters paper on ultrahigh resolution imaging and mechanical mapping of bacteriorhodopsin. http://pubs.acs.org/doi/abs/10.1021/nl202351t. I thought I would post this link as nice example of the science that can be done using the AFMs high resolution imaging power, coupled with the inherent information available from mechanical tip
-
See this new paper on ultrahigh resolution imaging and mechanical mapping of bacteriorhodopsin. http://pubs.acs.org/doi/abs/10.1021/nl202351t. I thought I would post this link as nice example of the science that can be done using the AFMs high resolution imaging power, coupled with the inherent information available from mechanical tip-sample interaction
-
After two years of work, the book I'm editing is out now: "Life at the Nanoscale: Atomic Force Microscopy of Live Cells". Life at the Nanoscale provides a state-of-the-art overview about how atomic force microscopy (AFM) can be used to image living cells, to probe their attachment to substrates or to other cells, to measure their mechanical
-
AN135-Rev A0-Quantitative-Imaging-Living-Biological-Samples-PeakForceQNM-(HiRes).pdf This article summarizes work that has conducted over the past year on living (and thus soft) samples by using Peak Force QNM. It focuses on silicified organisms, bacteria, and eukaryiotic cells. The Note also proposes a range of probes that can be used to address these
-
It is now well established that measuring ex vivo the mechanical properties of living cells can be a good indicator of the health of the organism from which they were extracted. Atomic force microscopy (AFM) is a powerful investigation and diagnostic tool, especially in force mode. Nevertheless, force spectroscopy suffers from several limitations, including
-
The Department of Chemical and Biomolecular Engineering at the University of Houston has an immediate postdoctoral opening. The subject of investigation is the crystallization of hemin as one of the processes of malaria pathophysiology. The research activities will be carried out in collaboration with one of the medical schools in the Houston area and
-
Chiara, I think you likely have a HW problem that will have to be fixed if you want to operate in Closed Loop. Please contact your closest service center, you can find the contact info here: http://www.bruker-axs.com/nano_surfaces_support.html Best, Steve