-
I also guess i never specified my device either. I am using the Innova.
-
Thank you for post and interest Stefan. I have moved on to a sample. The tip I am using seems to be a standard for CAFM it is the SCM-PIC. I seem to be getting some sort of imagining now. If you have any tips let me know!
-
Has anybody used this software? I have used it several times to try and write things in our films. I was wondering if anyone knows if there has been any updates or similar software that have been released and is somewhat newer?
-
Yes the SCM-PIT is the tip that i have been using for conductive. It seems to be a standard for tests that involve voltage.
-
Yes the SCM-PIT is the tip that i have been using for conductive. It seems to be a standard.
-
No matter how hard i try i cannot get the probe to read the linear line on the 10M ohm. I even tried reengaging it. I scanned over the spot in contact mode a few times. It still shows a harmonic signal as the sample voltage goes from -5v to 5v. Any suggestions Stefan?
-
Also what method is the best for attaching a test sample to the metal disk? I am currently using an Innova system and we used double sided tape does this insulate the material from being conductive?
-
Thank you for the suggestion. I am very new to this method. I will have to research some more. If there are any key terms people know of that has been helpful for them. It seems like a trail and error just getting that connection right for the samples.
-
I am new to CAFM as i was reading through the manual it said that i need to check the signal using a 10 M-ohm resistor? Is this step mandatory? Do you have to set up a bias reference of some-sort before you perform a I/V scan on a material?